Electrical/Wiring repairs are ones which generally cannot be diagnosed using computer diagnostics equipment & can be very labour intensive due to the integral designs of wiring looms (concealed/behind panels, under carpets, trims, through doors etc.) An example of a wiring fault would be a tail light not working after the bulb has been replaced, in this instance there may be a break somewhere between the light switch in the dashboard & the tail light unit. The wiring between the two runs almost the whole length of the car & is subject to vibration & twisting, impact damage & abrasion. We have a fully trained auto electrician on site in order to carry out most wiring repairs you may require.

It is very difficult to quote for this type of repair as we do not know the extent & location of the fault. We give these problems to our automotive electrician who works through them with the required wiring diagrams & technical information until the fault is found, this is quoted & authorised on hourly increments. You will be kept updated throughout & can stop this electrical investigation at any time.